Tool loading form of lathe tool holder

June 03, 2020

Spring collet chuck tool holder
It is mainly used for clamping straight shank cutters and tools such as drills, milling cutters and taps. The elastic deformation of the circlip is 1mm, and the clamping range is 0.5-32mm in diameter.

Hydraulic chuck

A-lock screw, use Allen wrench to tighten the lock screw;

B-lock the piston and press the hydraulic medium into the expansion chamber;

C-expansion chamber, compressed by liquid to produce pressure;

D- thin expansion bushing, positioning the center of tool clamping rod and enveloping evenly during locking.

E-special seal ensures ideal seal and long service life.

Tool holder form
Using induction heating technology to heat the clamping part of the tool on the handle so that its diameter will expand, and then put the cold tool bar into the hot tool handle. The heating handle has large clamping force and good dynamic balance, which is suitable for high-speed machining. The accuracy of repeated positioning is high, generally within 2 μ m, and the radial run out is within 5 μ m; the anti pollution ability is good, and the anti-interference ability is good in processing. However, each specification of tool handle is only suitable for the installation of a tool with a handle diameter, and a set of heating equipment is required.

Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076