What manufacturing technology is used in spring collet

April 09, 2020

Manufacturing technology of spring collet: firstly, put the collet into the pressure cap, work the circlip gently, when the eccentric layout of the pressure cap is concave into the groove of the circlip, place the forceful circlip along the arrow positioning, then the two halves of the cone can be achieved. The ER collet needs to be turned to the sliding sleeve, that is to say, the drilling and tapping sleeve can be reliably replaced. When drilling, the Morse sleeve is fully automatic locked; when tapping, the torque covering load can safely slip and avoid the two halves of the tap. In addition, when changing the tool, use a wrench to loosen the pressure cap to lead out the collet and the tool, remove the tool, position the tool along the arrow and use the force to clamp the spring, then exit it, and then replace the clamp spring with the other hole diameter as required. The adjustable structure of the spring collet is often selected according to the way of bolt fastening and pin position. When adjusting and installing the clamp, the length of a certain part can be polished easily.

The clamping force of the spring chuck is relatively large, in addition, the clamping environment is relatively wide, and at the same time, there is not low reliability, so it has been widely applied to some light industries, such as the application in the light industry of machine tools. For ER chuck, it will have different categories, but different types of chuck are applied to different bias. It has not low reliability. It can put the credible position of the workpiece in a certain position, which plays a key role in the smooth production of products, and also increases the production efficiency of products. The spring collet should pay attention to the surface repair of decoration, which directly affects the surface texture of the product, and is characterized by rust prevention. Therefore, it is very important to choose a suitable, good and professional lubricant. Spring collet is a kind of software which can not be replaced in machine tools nowadays. The application environment is very large, efficient but easy to damage, so the consumption is magnificent. According to different data, the required heat treatment method of spring collet is different, and the hardness of each part of spring collet is different.

Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076