Problems to be paid attention to before using CNC collet chuck
September 27, 2020
CNC collet chuck processing technology: in the process, first of all, add the chuck into the pressure cap, and gently run the clamp spring. When the eccentric device of the pressure cap is concave into the groove of the clamp spring, evenly promote the clamp spring along the arrow mark, and then the cone can be broken. The ER collet chuck only needs to move the sliding sleeve, which can make the drilling and tapping sleeve exchange efficiently. When drilling, the Morse sleeve can be found automatically; when tapping, the torque load can be smooth to prevent the tap from breaking. When changing the tool outside the boundary, loosen the pressure cap with a spanner, lead out the chuck and the tool, remove the tool, push the retaining ring vigorously along the arrow mark to end it, and then replace the retaining ring with the remaining hole diameter through restriction. The adjustability of CNC lathe chuck is usually determined according to the bolt tightening and pin position path. When adjusting the fixture, the length of a circuit can be easily grinded.
The clamping force ratio of CNC collet chuck is many, and the clamping area is relatively wide, moreover, it also has a high precision, so it is widely used in a profession, such as in the application of machine tool profession, compared with ER collet chuck, it has different categories, and different types of collets are used in different bias. It has not low precision, can locate the components efficiently in a certain position, plays an important role in the smooth processing of products, and also improves the production efficiency of products. CNC chuck should pay attention to the external maintenance of decoration, which directly affects the external quality of products. The key feature is to treat corrosion. Therefore, it is particularly important to select a suitable, high-quality and professional antirust oil. CNC collet chuck is a common tool in machine tools, which can not be replaced nowadays. It is widely used, fast but easy to damage, so the consumption is huge. Due to the different data of CNC collet chuck, the limited heat treatment methods are different, and the density requirements of different parts of CNC collet chuck are different.