Ev> Blog> Precautions for accuracy verification of tool holder

Precautions for accuracy verification of tool holder

September 01, 2022
1. Select high-precision measuring tools, and the measuring unit is at least 0.002mm

2. According to the standard, the concentricity deviation of the spindle test rod shall be controlled within 300mm

Within 0.005. And tungsten steel rods with shank diameter tolerance within H6 shall be selected.

3. Before the tool handle is installed, pay attention to cleaning all parts, such as collet and nut, and keep the mechanical spindle clean.

4. When the tool handle clamps the standard bar, it shall be carried out according to the instructions to avoid improper clamping. Resulting in inaccurate measurement and error.

5. The standard measurement deflection accuracy shall be 4 times of the clamping handle diameter.
Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
You may also like
Related Categories

Bu tedarikçi için e-posta

Konu:
E-posta:
İleti:

Your message must be betwwen 20-8000 characters

Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
İlgili ürünler listesi
Mobil site

Copyright © Tüm hakları saklıdır 2024 JINING QINFENG MACHINERY HARDWARE CO.,LTD.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Gönder