Ev> Blog> Practical guidelines for toolholder maintenance

Practical guidelines for toolholder maintenance

May 19, 2022
1. Regularly clean all accessories and spare parts, tool handle (handle and head) and spindle. When not in use, apply a layer of oil to prevent oxidation.

2. Regularly remove the Graflex or capto assembly for cleaning and inspection.

3. Store the tool handle in a clean and dry place.

4. Visually check the wear of the tool handle, such as the trace of fretting corrosion. At the same time, check all accessories and spare parts visually: bushing, spindle pull pin, nut, etc., and replace them if necessary.

5. Always use specific installation and removal equipment, such as the toolbox unloader.

6. Do not overtighten the screw, and do not exceed its given torque limit. The wrench cannot be clamped without torque screws.

7. Do not exceed the recommended screw revolutions of the hydraulic clamping system. Regularly regulate the pressure of the hydraulic chuck with calibration instrument.

8. Do not let the fixture overheat.
Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
You may also like
Related Categories

Bu tedarikçi için e-posta

Konu:
E-posta:
İleti:

Your message must be betwwen 20-8000 characters

Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
İlgili ürünler listesi
Mobil site

Copyright © Tüm hakları saklıdır 2024 JINING QINFENG MACHINERY HARDWARE CO.,LTD.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Gönder