Ev> Blog> Installation method of spring clamp collet

Installation method of spring clamp collet

July 04, 2019

1. Firstly, the chuck is put into the nut and rotated gently. Then the eccentric part of the nut is concaved into the chute of the chuck spring. The chuck spring is moved uniformly along the arrow direction and loaded into the nut.


2. Install the clamp spring and the nut together on the chuck body or machine tool spindle, wipe off the cylindrical handle of the tool and put it into the clamping hole. Use the wrench to tighten the nut evenly and vigorously until the tool is clamped。

3. When changing the cutter, loosen the nut with a wrench to take out the chuck and the cutter, remove the cutter, push the clip spring to withdraw, and then replace the clip spring with other apertures as needed. [Note and avoid tightening nuts when no cutter is installed to avoid damaging the clip spring]
Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
You may also like
Related Categories

Bu tedarikçi için e-posta

Konu:
E-posta:
İleti:

Your message must be betwwen 20-8000 characters

Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
İlgili ürünler listesi
Mobil site

Copyright © Tüm hakları saklıdır 2024 JINING QINFENG MACHINERY HARDWARE CO.,LTD.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Gönder