Ev> Blog> Correct operation of spring chuck

Correct operation of spring chuck

July 02, 2020
Spring collet is often used as a unique structure, a spare part. When using, put the chuck into the pressure cap first, and rotate the clip with fingertips. When the part of the shaft of the pressing cap is depressed in the groove of the retaining ring, evenly exert force along the direction of the arrow to promote the snap ring, and the cone can fall off. Therefore, the chuck only needs to move the sliding sleeve, so that the drilling and tapping sleeves can be exchanged quickly.

When drilling, the Morse sleeve is aligned manually; when tapping, the torque overload can stabilize the tire burst and prevent the tap from falling off. In addition, when changing the tool, use a wrench to loosen the pressure cap, take out the collet and the cutter, put down the cutter, and push the snap ring with force along the arrow direction to make it dissolve, and then replace the retaining ring with other apertures as required.
Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
You may also like
Related Categories

Bu tedarikçi için e-posta

Konu:
E-posta:
İleti:

Your message must be betwwen 20-8000 characters

Bizimle iletişime geçin

Author:

Mr. jiames.wang

E-posta:

info@qfmh.com

Phone/WhatsApp:

8613705473076

Popüler Ürünler
Şirket haberleri
Sektörel Haberler
İlgili ürünler listesi
Mobil site

Copyright © Tüm hakları saklıdır 2024 JINING QINFENG MACHINERY HARDWARE CO.,LTD.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Gönder