Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
The principle of thermal shrinkage tool holder is to use the difference of thermal expansion coefficient between the tool holder and the tool to clamp the hot-charging system of the tool strongly. The system uses the tool handle heat shrinkage machine for heating and clamping, and the tool loading and unloading is simple and convenient. There are no nuts and components required for the clamp in the tool installation section. Simple, efficient and slender head shape of the tool holder can make...
1. System Accuracy: System Accuracy includes System Positioning and Holding Accuracy and Tool Repeated Positioning Accuracy. The former refers to Tool and Tool Handle. The accuracy of the connection between the tool handle and the spindle of the machine tool; the latter refers to the consistency of the accuracy of the tool system after each tool change. The tool system has high system precision, so that the static and dynamic stability of the tool system can be guaranteed under the condition of...
In general, the most commonly used tool holder is BT tool holder. When the taper of BT tool holder is 7:24 And the speed is about 10,000 r/min, the tool holder-spindle system does not appear obvious deformation. But when the spindle rises from 10,000 r/min to 40,000 r/min, due to centrifugal force, the end of the spindle system will appear larger deformation, and its diameter jump from 0.2 M. It increased to about 2.8 M. Clearance between tool holder and taper hole of spindle will appear...
HSK (German and Italian Hohl Schaft Kegel abbreviation) tool handle is a kind of double-sided clamping tool handle developed by the Institute of Machine Tool Research of Aachen University of Technology in Germany in the early 1990s. It is the most representative double-sided clamping tool handle. Since 1987, it has been manufactured by WZL, the Institute of Machine Tool Research of German University of Technology, and some tool manufacturers and machine tools manufacturers. More than 30 units,...
1. System accuracy: The accuracy of the system includes the accuracy of positioning and clamping of the system and the accuracy of repeated positioning of the tool. The former refers to the accuracy of the connection between the tool and the tool handle, and between the tool handle and the spindle of the machine tool; the latter refers to the consistency of the accuracy of the tool system after each tool change. The tool system has high system precision, so that the static and dynamic stability...
Product Description: The name of a process before coating after finishing is not uniform at home and abroad. It is called "edge passivation", "edge strengthening", "edge honing", "edge preparation" or "ER (Edge Radiusing) treatment". By deburring, leveling and polishing the cutter, the quality of the cutter can be improved and the service life can be prolonged. 1. The purpose of tool passivation and polishing: 1. Improve the service life of cutting tools. 2. Improve the efficiency of machine...
BT CNC tool holder is mainly a Japanese standard, and it is also a commonly used standard. The universal tool handle with taper of 7:24 has five standards and specifications, namely NT (traditional type), DIN69871 (German standard), IS07388/1 (international standard), MASBT (Japanese standard) and ANSI/ASME (American standard). The German standard of NT type tool holder is DIN2080, which is to tighten the tool holder by pulling rod on traditional machine tools, also known as ST in China; the...
In CNC machining, because the path of tool location controlled by program does not coincide with the shape of actual cutting edge, there is a difference between tool radius and tool length in size. Therefore, it is necessary to calculate the path coordinates of tool location according to the shape and size of actual machining. Processing is controlled accordingly. There are two types of tool compensation in CNC machining: tool radius compensation (to compensate for the influence of tool radius...
1. What is a Turning-Milling compound machining center? Turning-milling compound machining center is a multi-functional machine tool which uses the combined motion of workpiece rotation and tool rotation to realize the cutting of workpiece. It can complete turning, milling, drilling, boring and five-axis linkage processing in one clamp, so it is also called "multi-task machine tool". Because it can complete most or even all of the processing projects in one clamp, the processing accuracy and...
HSK handle is a high-speed handle, especially the E series keyless groove is the highest dynamic balance standard main handle SK series speed can not be too high, generally about 10,000 to the limit (limited and pull nail tension mode), but HSK due to the complexity of manufacturing, belongs to the type of over-positioned internal rising price is relatively high, and Kenna specially made for Mazak similar. HSK handles are mostly used in turning and milling centers. Look at the data for...
Tool shank is the connection of machine tool and tool. Tool shank is a key link affecting concentricity and dynamic balance. It must not be treated as a general component. Concentricity can determine whether the cutting amount of each cutting edge is uniform under the circumstance of rotating one cycle, and the dynamic unbalance will produce periodic vibration when the spindle rotates. I. There are two main types of spindle conical holes. According to the taper of the tool hole on the spindle...
CNC milling machine is a kind of automatic processing equipment developed on the basis of general milling machine. The processing technology and structure of the two machines are basically the same. CNC milling machine can be divided into two categories: non-tool library and tool library. Among them, the NC milling machine with tool library is also called machining center. 1. Classification according to the form of tool change (1) The tool changing device of the machining center with a tool...
Is07388/1 is the international standard. ISO standards refer to the standards formulated by the International Organization for Standardization (ISO). The predecessor of ISO is the International Standardization Association (ISA). ISA was founded in 1926 (the third joint meeting of representatives of seven standardization bodies of the United States, Britain and Canada in 1926 decided to establish the International Standardization Association, which was established in 1928). The outbreak of World...
There are JBR-50L100 and JBR-50L125 types of broaching nails for boring machine, which are mainly used in boring machine. Jinghua CNC nails are made of high quality steel 20CrMnTi. According to different uses, the hardness HRC ranges from 48 degrees to 56 degrees. The overall compact and stable, special rust-proof material, overall carburizing treatment, compared with the ordinary pull nail increased by 1 times the wear resistance and tensile resistance. The overall performance is better....
1. Firstly, the chuck is put into the nut and rotated gently. Then the eccentric part of the nut is concaved into the chute of the chuck spring. The chuck spring is moved uniformly along the arrow direction and loaded into the nut. 2. Install the clamp spring and the nut together on the chuck body or machine tool spindle, wipe off the cylindrical handle of the tool and put it into the clamping hole. Use the wrench to tighten the nut evenly and vigorously until the tool is clamped。 3. When...
As an important configuration of the CNC lathe, the tool holder plays a vital role in the operation of the machine. Once the failure occurs, it is likely to cause the workpiece to be scrapped or even cause the chuck to collide with the tool holder. In the fault repair of CNC machine tools, the complex fault phenomenon of the electric control part is variable. Some fault phenomena are not obvious. The difficulty of finding is relatively large, and the mechanical part is similar to the ordinary...
The drill chuck is one of the most commonly used tools for the drill press. The clamping is carried out by the small bevel gear of the key. The nut of the drill chuck is covered by a cone. The nut of the jaw is used to extend the jaws to loosen the drill bit. After the actual use for a period of time, the taper wheel on the chuck chuck and the small bevel gear of the key are worn to make the bit difficult to clamp. Therefore, when drilling, the chuck jaw and the bit handle slip and wear,...
A drill chuck is a specialized clamp designed to hold drill bits in place while they are being rotated by the drill. The chucks nearly always have three jaws that press down on the drill bit so that it won't slip when it pressed against a surface that it needs to penetrate. They can also be used to hold bits and tools heads of other rotary tools. Once a bit is inserted into the chuck, the jaws are tightened on the bit by rotating a threaded screw. The screw threads and the threads on the backs...
Introduction: One of the hardware tools commonly used in our homes is wrenches. According to its power, it can be divided into electric wrenches and manual wrenches. At present, we use hand-held wrenches in our homes, although it is a tool that can be seen everywhere in our lives. , but its classification and use may not be understood by most people. The first and most common is the open-end wrench. The open-end wrench is also called the open-end wrench. It is divided into single head and...
The feeding spring collet of our factory single-axis automatic lathe has a long service life, the chuck is worn, and the elastic force is reduced, which will result in poor feeding. Sometimes the self-made spring collet is not tight due to its own quality problems, which affects the feeding. In this case, the column should be replaced or reworked. Now use a small circlip to extend the life of the collet.
The phenomenon of the continuous operation of the tool holder or the failure of a certain tool position and its causes The following is an example of a lathe equipped with a DTM system (Titma CNC system): Occasionally, during the automatic operation of the lathe, the continuous operation of the tool holder or the non-stop of a certain position sometimes run continuously for 2~3 positions and then stop and lock. When continuous operation or a certain tool position does not stop, the “301” alarm...
The use of ball bearings and tool holders for the cutting of slender workpieces or soft materials (such as plastic bars) can achieve good processing results. This tool holder is very simple to make. The ball bearing and the tool holder are formed by an aluminum plate milling saw. As shown in the figure, the horizontal span of the body frame is installed in the seat 6 of the lathe composite tool holder, and the lap under the body frame has a certain length and is driven by the lathe pallet, so...
The method of clamping the tool by the tool holder is to clamp the tool by pulling force (see figure). The tool loading and unloading is very convenient and can improve the efficiency, and the effect is better on the lathe (vertical car, sleeper) and the inserting bed. The size of the tool holder 4 can be determined according to the size of the workpiece and the selected tool. In use, the tool is loaded into the square mouth of the tie rod 3, and the nut 1 is tightened to clamp the tool for...
In our production, we use the multi-purpose fine-tuning boring tool holder (see Figure 1a) to solve the difficulty of boring and milling the groove on the milling machine. The standard Morse cone is used for the connection between the tool post and the main shaft, and it can also be used for boring and drilling and milling machines. The tool holder can conveniently and accurately process through holes of different diameters, blind holes, end faces of step holes and hollowing out of the inner...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.